Add parallel Print Page Options

27 He also made the ten stands of bronze; each stand was four cubits long, four cubits wide, and three cubits high. 28 This was the construction of the stands: they had panels, and the panels were set in the frames 29 and on the panels that were set in the frames were lions, oxen, and cherubim. Upon the frames, both above and below the lions and oxen, there were wreaths of beveled work. 30 Moreover each stand had four bronze wheels and axles of bronze; and at the four corners were supports for a laver. The supports were cast, with wreaths at the side of each. 31 Its opening was within a crown which projected upward one cubit; its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings; and its panels were square, not round. 32 And the four wheels were underneath the panels; the axles of the wheels were of one piece with the stands; and the height of a wheel was a cubit and a half. 33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs, were all cast. 34 There were four supports at the four corners of each stand; the supports were of one piece with the stands. 35 And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it. 36 And on the surfaces of its stays and on its panels, he carved cherubim, lions, and palm trees, according to the space of each, with wreaths round about. 37 After this manner he made the ten stands; all of them were cast alike, of the same measure and the same form.

38 And he made ten lavers of bronze; each laver held forty baths, each laver measured four cubits, and there was a laver for each of the ten stands. 39 And he set the stands, five on the south side of the house, and five on the north side of the house; and he set the sea at the southeast corner of the house.

40 Hiram also made the pots, the shovels, and the basins. So Hiram finished all the work that he did for King Solomon on the house of the Lord: 41 the two pillars, the two bowls of the capitals that were on the tops of the pillars, and the two networks to cover the two bowls of the capitals that were on the tops of the pillars; 42 and the four hundred pomegranates for the two networks, two rows of pomegranates for each network, to cover the two bowls of the capitals that were upon the pillars; 43 the ten stands, and the ten lavers upon the stands; 44 and the one sea, and the twelve oxen underneath the sea.

45 Now the pots, the shovels, and the basins, all these vessels in the house of the Lord, which Hiram made for King Solomon, were of burnished bronze.

Read full chapter

27 He also made ten movable stands(A) of bronze; each was four cubits long, four wide and three high.[a] 28 This is how the stands were made: They had side panels attached to uprights. 29 On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work. 30 Each stand(B) had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. 31 On the inside of the stand there was an opening that had a circular frame one cubit[b] deep. This opening was round, and with its basework it measured a cubit and a half.[c] Around its opening there was engraving. The panels of the stands were square, not round. 32 The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. 33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

34 Each stand had four handles, one on each corner, projecting from the stand. 35 At the top of the stand there was a circular band half a cubit[d] deep. The supports and panels were attached to the top of the stand. 36 He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around. 37 This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.

38 He then made ten bronze basins,(C) each holding forty baths[e] and measuring four cubits across, one basin to go on each of the ten stands. 39 He placed five of the stands on the south side of the temple and five on the north. He placed the Sea on the south side, at the southeast corner of the temple. 40 He also made the pots[f] and shovels and sprinkling bowls.(D)

So Huram finished all the work he had undertaken for King Solomon in the temple of the Lord:

41 the two pillars;

the two bowl-shaped capitals on top of the pillars;

the two sets of network decorating the two bowl-shaped capitals on top of the pillars;

42 the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network decorating the bowl-shaped capitals(E) on top of the pillars);

43 the ten stands with their ten basins;

44 the Sea and the twelve bulls under it;

45 the pots, shovels and sprinkling bowls.(F)

All these objects that Huram(G) made for King Solomon for the temple of the Lord were of burnished bronze.

Read full chapter

Footnotes

  1. 1 Kings 7:27 That is, about 6 feet long and wide and about 4 1/2 feet high or about 1.8 meters long and wide and 1.4 meters high
  2. 1 Kings 7:31 That is, about 18 inches or about 45 centimeters
  3. 1 Kings 7:31 That is, about 2 1/4 feet or about 68 centimeters; also in verse 32
  4. 1 Kings 7:35 That is, about 9 inches or about 23 centimeters
  5. 1 Kings 7:38 That is, about 240 gallons or about 880 liters
  6. 1 Kings 7:40 Many Hebrew manuscripts, Septuagint, Syriac and Vulgate (see also verse 45 and 2 Chron. 4:11); many other Hebrew manuscripts basins