Solomon Builds His Palace

7 It took Solomon thirteen years, however, to complete the construction of his palace.^{(A) 2} He built the Palace^(B) of the Forest of Lebanon^(C) a hundred cubits long, fifty wide and thirty high,^[a] with four rows of cedar columns supporting trimmed cedar beams. ³ It was roofed with cedar above the beams that rested on the columns—forty-five beams, fifteen to a row. ⁴ Its windows were placed high in sets of three, facing each other. ⁵ All the doorways had rectangular frames; they were in the front part in sets of three, facing each other.^[b]

⁶ He made a colonnade fifty cubits long and thirty wide.^[c] In front of it was a portico, and in front of that were pillars and an overhanging roof.

⁷ He built the throne hall, the Hall of Justice, where he was to judge,^(D) and he covered it with cedar from floor to ceiling.^{[d](E) 8} And the palace in which he was to live, set farther back, was similar in design. Solomon also made a palace like this hall for Pharaoh’s daughter, whom he had married.^(F)

⁹ All these structures, from the outside to the great courtyard and from foundation to eaves, were made of blocks of high-grade stone cut to size and smoothed on their inner and outer faces. ¹⁰ The foundations were laid with large stones of good quality, some measuring ten cubits^[e] and some eight.^{[f] 11} Above were high-grade stones, cut to size, and cedar beams. ¹² The great courtyard was surrounded by a wall of three courses^(G) of dressed stone and one course of trimmed cedar beams, as was the inner courtyard of the temple of the Lord with its portico.

The Temple’s Furnishings^(H)(I)

¹³ King Solomon sent to Tyre and brought Huram,^{[g](J) 14} whose mother was a widow from the tribe of Naphtali and whose father was from Tyre and a skilled craftsman in bronze. Huram was filled with wisdom,^(K) with understanding and with knowledge to do all kinds of bronze work. He came to King Solomon and did all^(L) the work assigned to him.

¹⁵ He cast two bronze pillars,^(M) each eighteen cubits high and twelve cubits in circumference.^{[h] 16} He also made two capitals^(N) of cast bronze to set on the tops of the pillars; each capital was five cubits^[i] high. ¹⁷ A network of interwoven chains adorned the capitals on top of the pillars, seven for each capital. ¹⁸ He made pomegranates in two rows^[j] encircling each network to decorate the capitals on top of the pillars.^[k] He did the same for each capital. ¹⁹ The capitals on top of the pillars in the portico were in the shape of lilies, four cubits^[l] high. ²⁰ On the capitals of both pillars, above the bowl-shaped part next to the network, were the two hundred pomegranates^(O) in rows all around. ²¹ He erected the pillars at the portico of the temple. The pillar to the south he named Jakin^[m] and the one to the north Boaz.^{[n](P) 22} The capitals on top were in the shape of lilies. And so the work on the pillars^(Q) was completed.

²³ He made the Sea^(R) of cast metal, circular in shape, measuring ten cubits from rim to rim and five cubits high. It took a line^(S) of thirty cubits^[o] to measure around it. ²⁴ Below the rim, gourds encircled it—ten to a cubit. The gourds were cast in two rows in one piece with the Sea.

²⁵ The Sea stood on twelve bulls,^(T) three facing north, three facing west, three facing south and three facing east. The Sea rested on top of them, and their hindquarters were toward the center. ²⁶ It was a handbreadth^[p] in thickness, and its rim was like the rim of a cup, like a lily blossom. It held two thousand baths.^[q]

²⁷ He also made ten movable stands^(U) of bronze; each was four cubits long, four wide and three high.^{[r] 28} This is how the stands were made: They had side panels attached to uprights. ²⁹ On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work. ³⁰ Each stand^(V) had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. ³¹ On the inside of the stand there was an opening that had a circular frame one cubit^[s] deep. This opening was round, and with its basework it measured a cubit and a half.^[t] Around its opening there was engraving. The panels of the stands were square, not round. ³² The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. ³³ The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

³⁴ Each stand had four handles, one on each corner, projecting from the stand. ³⁵ At the top of the stand there was a circular band half a cubit^[u] deep. The supports and panels were attached to the top of the stand. ³⁶ He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around. ³⁷ This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.

³⁸ He then made ten bronze basins,^(W) each holding forty baths^[v] and measuring four cubits across, one basin to go on each of the ten stands. ³⁹ He placed five of the stands on the south side of the temple and five on the north. He placed the Sea on the south side, at the southeast corner of the temple. ⁴⁰ He also made the pots^[w] and shovels and sprinkling bowls.^(X)

So Huram finished all the work he had undertaken for King Solomon in the temple of the Lord:

All these objects that Huram^(AA) made for King Solomon for the temple of the Lord were of burnished bronze. ⁴⁶ The king had them cast in clay molds in the plain^(AB) of the Jordan between Sukkoth^(AC) and Zarethan.^{(AD) 47} Solomon left all these things unweighed,^(AE) because there were so many;^(AF) the weight of the bronze^(AG) was not determined.

⁴⁸ Solomon also made all^(AH) the furnishings that were in the Lord’s temple:

⁵¹ When all the work King Solomon had done for the temple of the Lord was finished, he brought in the things his father David had dedicated^(AN)—the silver and gold and the furnishings^(AO)—and he placed them in the treasuries of the Lord’s temple.

¹⁵ For the front of the temple he made two pillars,^(A) which together were thirty-five cubits^[a] long, each with a capital^(B) five cubits high. ¹⁶ He made interwoven chains^[b](C) and put them on top of the pillars. He also made a hundred pomegranates^(D) and attached them to the chains. ¹⁷ He erected the pillars in the front of the temple, one to the south and one to the north. The one to the south he named Jakin^[c] and the one to the north Boaz.^[d]

The Temple’s Furnishings^(E)

4 He made a bronze altar^(F) twenty cubits long, twenty cubits wide and ten cubits high.^{[e] 2} He made the Sea^(G) of cast metal, circular in shape, measuring ten cubits from rim to rim and five cubits^[f] high. It took a line of thirty cubits^[g] to measure around it. ³ Below the rim, figures of bulls encircled it—ten to a cubit.^[h] The bulls were cast in two rows in one piece with the Sea.

⁴ The Sea stood on twelve bulls, three facing north, three facing west, three facing south and three facing east.^(H) The Sea rested on top of them, and their hindquarters were toward the center. ⁵ It was a handbreadth^[i] in thickness, and its rim was like the rim of a cup, like a lily blossom. It held three thousand baths.^[j]

⁶ He then made ten basins^(I) for washing and placed five on the south side and five on the north. In them the things to be used for the burnt offerings^(J) were rinsed, but the Sea was to be used by the priests for washing.

⁷ He made ten gold lampstands^(K) according to the specifications^(L) for them and placed them in the temple, five on the south side and five on the north.

⁸ He made ten tables^(M) and placed them in the temple, five on the south side and five on the north. He also made a hundred gold sprinkling bowls.^(N)

⁹ He made the courtyard^(O) of the priests, and the large court and the doors for the court, and overlaid the doors with bronze. ¹⁰ He placed the Sea on the south side, at the southeast corner.

¹¹ And Huram also made the pots and shovels and sprinkling bowls.

So Huram finished^(P) the work he had undertaken for King Solomon in the temple of God:

All the objects that Huram-Abi^(R) made for King Solomon for the temple of the Lord were of polished bronze. ¹⁷ The king had them cast in clay molds in the plain of the Jordan between Sukkoth^(S) and Zarethan.^{[k] 18} All these things that Solomon made amounted to so much that the weight of the bronze^(T) could not be calculated.

¹⁹ Solomon also made all the furnishings that were in God’s temple: